arc spraying
英 [ɑːk ˈspreɪɪŋ]
美 [ɑːrk ˈspreɪɪŋ]
电弧喷镀
双语例句
- Influence of arc spraying parameters on the property of hardness of Ni-Cr-Al coating
热喷涂工艺对Ni-Cr-Al涂层硬度性能的影响 - Ceramic Mould and Integrated Mould Design in Rapid Steel Mould Manufacture Process Based on Arc Spraying
电弧喷涂制模过程中陶瓷母模及整体模具设计 - Microstructure and Thermal Shock Resistance Property Research of FeMnCr/ ZrO_2 Composite Coating Deposited by High Velocity Arc Spraying
高速电弧喷涂FeMnCr/ZrO2复合涂层组织和抗热震性能的研究 - Application of High Velocity Arc Spraying in Repairing of Marine Tail Shafts
高速电弧喷涂在船舶尾轴修复中的应用 - Study on the Arc Spraying Anti-corrosion Techniques for the Main Table of Cutting Machinery
切纸机主工作台电弧喷涂防腐工艺研究 - Friction Behavior of Iron-Based Containing Amorphous Phase Coating Prepared by Electric Arc Spraying
高速电弧喷涂含非晶相Fe基涂层的摩擦磨损特性 - Anticorrosion Research of Arc Spraying Technology in Wastewater Treatment
电弧喷涂防腐在污水处理钢制设备中的应用研究 - It is obtained from test that the Rare-earth additives can improve the adhesive strength, decrease porosity, make porousness smaller, therefor, raise the properties of the arc spraying coatings.
结果表明稀土的加入提高了涂层的结合强度，使孔隙变小、数量减少，明显改善涂层性能。 - The arc spraying technology was compared with the other thermal spraying technologies in the ways of coating performance and so on.
将电弧喷涂与其他热喷涂技术在涂层性能等方面做了对比。 - Research on Technical Optimization and Property of Ni-Cr-Al Coating Prepared by Arc Spraying
电弧喷涂Ni-Cr-Al涂层工艺优化与性能研究 - Fabrication of primary ceramic mold in arc spraying manufacture process of steel mould
电弧喷涂制造钢基模具过程中陶瓷母模的制作 - This paper summarized the preparation and advantages of cored wires for high velocity arc spraying and described its current development status.
对高速电弧喷涂粉芯丝材的特点及制备工艺进行了概述，并介绍了粉芯丝材的国内外发展现状。 - Arc Spraying of other parameters by the spraying equipment and spraying decide the properties of materials.
电弧喷涂的其他规范参数由喷涂设备和喷涂材料的特性决定。 - Turbine cylinder middle surface, the rotor journal wear, cavitation repair arc spraying equipment;
汽轮机汽缸中分面、转子轴颈磨损、汽蚀的修复电弧喷涂设备； - Simulated Design and Parameter Measurement of Plasma Arc Spraying Gun
等离子弧喷涂枪体的模拟设计及参数测量 - Technology and Property of Composite Coating by ARC Spraying Feeding from Outside
外送粉电弧喷涂复合涂层工艺与性能的研究 - The latest situation of research and development of the cored wires for arc spraying was summarized.
概述了电弧喷涂用粉芯丝材的研究和发展现状。 - Composite coating protection technology of arc spraying and powder coating spraying
电弧喷涂与粉末涂料喷涂复合涂层防护技术 - Effect of Supersonic Arc Spraying Parameters on Anchoring Strength of Al-Mg Alloy Coating
电弧喷涂工艺参数对铝镁合金涂层结合强度的影响 - Microstructure and properties of FeNiTi/ Cr_3C_2 coatings containing nano-TiC powder prepared by high velocity arc spraying
纳米TiC对高速电弧喷涂FeNiTi/Cr3C2涂层组织与性能的影响 - Study of Thermal Shock Behavior and High-Temperature Oxidation Resistance of Fe-Based Coating Prepared by High Velocity Arc Spraying
高速电弧喷涂铁基涂层的热震和抗高温氧化性能空心微珠为基的铁氧体涂层材料的制备与研究 - By the introduction of the Arc Spraying ( AS) technology, the research and application of the technical were analyzed, and the inspection criterions were discussed.
通过对电弧喷涂的技术介绍，对该技术的研究及应用进行了分析，并对检验的规范和标准进行了探讨。 - Further theoretical analysis is conducted on the principle of arc spraying process optimized by orthogonal experimental design.
对电弧喷涂的工艺原理进行了较为深入的理论分析；利用正交试验对电弧喷涂工艺进行了优化； - The latest development of arc spraying equipment and material in China and abroad is summarized.
概述了国内外电弧喷涂设备和材料的最新发展状况。 - Optimum process parameters optimized by orthogonal experimental design are acquired following the principle of arc spraying process.
根据对电弧喷涂工艺原理的研究，利用正交设计的方法对工艺参数进行了优化选择试验，得出最佳工艺参数； - A new technology-the electric arc spraying technology combined by powder is introduced.
介绍一种新型电弧喷涂技术粉末复合电弧喷涂技术。 - The arc spraying coating and its tribology property are investigated in this paper.
对电弧喷涂涂层及其摩擦学性能进行了研究。 - Particle velocities of arc spraying have a great influence on coatings quality.
在电弧喷涂中，喷涂粒子的速度是影响涂层质量的重要因素。 - Arc spraying materials include solid wire and cored wire.
电弧喷涂材料主要包括实心丝材和粉芯丝材。 - Corrosion resistance mechanism of arc spraying nano-sealing composite coating is discussed by electrochemical impedance spectroscopy ( EIS).
通过试验研究分析了纳米改性封闭涂料对电弧喷涂层的双重封闭作用机理，用电化学阻抗谱（EIS）研究了电弧喷涂纳米封闭复合涂层的防腐蚀机理。